Aller directement au contenu Aller au menu de navigation
Une quantité plus faible de ce produit a été ajoutée à votre panier en raison d'un stock insuffisant

Pioneer DJ PLX-500 Platine à entraînement direct Noir

150814
La PLX-500 hérite de la disposition de la platine professionnelle PLX-1000 et produit un son analogique chaud et clair.
Plus

❤ 30 jours pour l'aimer ou le retourner

🚛 Expédition gratuite à partir de 79€

🔒 Paiement sécurisé

Passez au vinyle

La PLX-500 hérite de la présentation de la platine vinyle professionnelle PLX-1000 et produit un son analogique clair et chaleureux - le lecteur idéal si vous voulez commencer à jouer avec des vinyles ou si vous voulez juste écouter votre collection de disques chez vous.

Solidement construit avec un excellent amortissement des vibrations et une lecture audio très précise, ce lecteur High Torque propose une sortie USB vous permettant de numériser votre collection de vinyles dans notre logiciel gratuit rekordbox. Vous pouvez également combiner la PLX-500 au Plus Pack rekordbox dvs, à une table de mixage compatible et au Vinyle de Contrôle RB-VS1-K pour lire et scratcher des fichiers numériques.

Excellente conception sonore

Tout comme la PLX-1000, la PLX-500 est conçue pour délivrer un son vinyle haute qualité. Le chemin audio le plus court possible entre le stylus et les sorties permet de réduire la distorsion, tandis que le commutateur d'entrée Phone/Line vous permet de brancher directement la platine à votre équipement audio ou à des enceintes alimentées sans avoir besoin d'un amplificateur externe.

Numérisation facile

Enregistrez votre collection vinyle en fichiers numériques haute qualité en branchant simplement la platine à votre PC ou Mac par la sortie USB.

Mix fluide

Utilisez la PLX-500 pour mixer et scratcher vos disques vinyles, ou combinez la platine au logiciel rekordbox dvs, à une table de mixage compatible et au Vinyle de Contrôle RB-VS1-K pour lire et mixer vos fichiers numériques.

Présentation des prochettes

Exposez les pochettes de vos disques pendant que vous les écoutez, grâce au support intégré au couvercle de la platine.

Choissisez votre couleur

Le PLX-500 est disponible en noir ou en blanc pour s'harmoniser avec la couleur de votre matériel ou l'intérieur de votre maison.

Tout pour démarrer

Cette platine est fournie avec tous les accessoires nécessaires pour commencer : un couvercle avec support pour pochettes, un couvre-plateau et une tête de lecture PC-HS01-S édition argent (cellule et stylus inclus).

Caractéristiques du produit
Code EAN:4573201240453
Numéro du fabricant :PLX-500-K
Poids du produit :12.218 kilograms
Dimensions et Poids
Poids du produit : 12.218kg
Taille de l'emballage : 26cm
Largeur de l'emballage : 55cm
Longueur de l'emballage : 45.5cm
    FAQ

    The power does not turn on.

    1. Is the power cord connected correctly? Connect the power cord to a power outlet. Refer to “Connections” in the Operating Instructions for details.
    2. Is the [POWER] switch set to [ON]? Set the [POWER] switch to [ON].

    There is no sound, or the volume is very low.

    1. Are the audio cables connected correctly? Set the PHONO/LINE switches correctly to match the input terminals to which devices are connected. Refer to “Connections” in the Operating Instructions for details.
    2. Are the terminals or plugs dirty? Wipe off the dirt from the terminals and plugs before connecting them. Wipe off the dirt from the headshell and tone arm connection points before connecting.
    3. Is the headshell attached correctly? Connect the headshell correctly. Refer to “Before you start” in the Operating Instructions for details.

    The needle skips when I perform scratching.

    Possible reasons could be as follows.
    1. The tone arm and cartridge are not connected correctly.
     - Refer to the Operating Instructions for information on how to connect.
    2. The tone arm and needle pressure are not adjusted correctly.
     - Refer to the adjustment methods detailed in the Operating Instructions, and adjust the settings so that they are appropriate to the needle being used.
    3. The record is dirty, scratched, or worn.
     - Clean records with a dedicated cleaner, and use records that are in good condition as much as possible.
    4. The tip of the needle is worn or broken.
     - Replace the needle with a new one.
    5. The product is inclined.
     - To the extent possible, use the product in a horizontal location where it is not affected by external vibrations. 
      Additionally, the insulators can be turned to make minor adjustments to move the unit to the horizontal.

    The tone arm moves, even though anti-skating is set to 0.

    This is the efficiency of this unit. When adjusting needle pressure, adjust positioning so that the tone arm is balanced when still.

    The TEMPO slider value does not match the actual rotation speed.

    The TEMPO slider value is approximate. Please use it as a guide when adjusting the tempo.

    I cannot record in rekordbox.

    Please check the following.
    (1) Is “USB REC” displayed in the recording source selection window of the rekordbox REC panel?
    If not displayed: The computer has not recognized the device. Check if the USB cable is connected correctly to the computer.
    (2) When playing a record, does the level meter on the rekordbox REC panel move?
    If the level meter does not operate, or if the meter does not move: The recording level may be set low. Use the recording adjustment knob to set an appropriate recording level.

    Strobe pattern does not stop even when the TEMPO slider is set to 0 when playing at 45 rpm.

    The pattern display due to the strobe illuminator is an approximate display. For a 50 Hz power supply, and when set to 45 rpm, the pattern does not stop completely. This is in accordance with product specifications.

    The volume is high (distortion)

    Is the audio cable connected correctly? Set the PHONO/LINE switch to match the input terminals that devices are connected. Refer to “Connections” in the Operating Instructions for details.

    Noise is generated in output sound

    If a USB cable and audio cable from the unit are each used to connect to a different peripheral device and then those two peripheral devices are additionally connected together with a USB cable or other cable, noise may be generated in the output sound because the cables will form a loop.
    In that case, disconnect any cable that is unnecessary depending on the purpose.